Add a usb-c socket which connects directly to the usb-c monitor to the next hat:https://52pi.com/collections/raspberry-pi-1/products/52pi-pd-power-extension-adapter-board-for-raspberry-pi-5Now this...

Hi... this is how I made my PI5 8 GB withthe N20 Dual NVME boot from the nvme0n1:Used pi imager to image Bookworm (latest as of 1 Nov 24) full image to a USB 3 drive. Then booted the PI 5 with the ...

I have an EP-0143 19" 1U rack mount panel for RPi 4's.  I just tried it with an RPi 5, which fits!  The RPi 5 boots from the SD card it it is installed directly in the RPi but not if I us...

I bought three N21 base units to test in a project, using SSD NVME M.2 1Tera, but I was unable to boot from this memory. I tried every way, and only then did I pay attention to a line in the manual...

I purchased the ZP-0130 mini tower kit and I cannot find the connected nas drive.  I installed the 52pi image file from the Wiki and the mini tower is set up and running fine. I cannot find or...

Hi everyone! I have an ICE-Tower Cooling Fan and I would like to turn off/disable the LED's. Does anyone know how to do this? Thanks!

hello, so i just bought my second N07 bottom hat and love it, i also bought a B14 quad pcie hat. Are these  compatible with each other? when i plug in the B14 hat with an sd card running th...

Is the N04 M.2 NVMe hat compatible with the Armor Lite V5? Is there enough room for the flat flexible pcie cable or does it interfere with the fan?

Hello everyone, I've recently purchased the ZP-0129 case along with the EP-0136 UPS HAT for my Raspberry Pi 4B. Initially, everything seemed to work perfectly. I used both the provided Raspbian im...

did you resolve?

I was following guidance from https://wiki.52pi.com/index.php?title=EP-0210    doesn't boot after reboot!   booting from SD-card works I was trying to use network-boot (di...

Hi, I have an Ice Tower Plus for Raspberry Pi 5 and I am very satisfied. The heat sink at the bottom gets very warm. It would be great if you could bring out a suitable case or even better an 4 Lay...

Hi,  I bought the N07 board and installed it according to the manual. The pogo pins are lining up perfectly and the ribbon cable is attached properly.  I bought a new Kingston NV2 NVMe ...

Blocking those pins is a major inconvenience.  Same for the 3.3v and SDA/SCL pins.  Are they actually being used or is that 2x5 header jusr used for mating security?

I've run the python code so I'll add it. ------------------------------------------------------------------Current information of the detected Raspberry Pi-----------------------------------------...

@mandy   thanks for the reply Sorry for the late confirmation.I read the serial number from the UPS I currently have.In addition to this UPS, we have 33 other UPSs. The serial number was re...

Greetings. I recently ordered the above NVMe hat, and an accompanying 256 GB 2230 NVMe. I am struggling to get it up and running. Hoping to get some help. To start I am running the latest version...

Am I doing something wrong.  I can get my NVMe 1tb drive working over the PCIe interface version 2 and 3 when using PiOS (Debian).  When I try to install Windows 11 to as an USB drive wit...

Could you please offer your UPS's S/N number by execute the python script in repository you download from github?  

It's been send out for a month, did you get the product?