+28 people are viewing this product.

Raspberry Pi Debug Probe Compatible with Raspberry Pi Pico/Picow

ER-0046
52Pi Store
$12.00 $0.00( / )

優惠剩餘

[Description] The Raspberry Pi Debug Probe is a USB device that provides both a UART serial port and a standard Arm Serial Wire Debug (SWD) interface. The probe is designed for easy, solderless, plug-and-play debugging. NOTE:For more information on the Raspberry Pi three-pin debug connector see the specification [ https://rptl.io/debug-spec...
加入願望單

Guarantee safe & secure checkout

PayPal

[Description]

The Raspberry Pi Debug Probe is a USB device that provides both a UART serial port and a standard Arm Serial Wire Debug (SWD) interface. The probe is designed for easy, solderless, plug-and-play debugging.

NOTE:For more information on the Raspberry Pi three-pin debug connector see the specification [ https://rptl.io/debug-spec ].


[Features]

  • USB to ARM Serial Wire Debug (SWD) port
  • USB to UART bridge
  • Compatible with the CMSIS-DAP standard
  • Works with OpenOCD and other tools supporting CMSIS-DAP
  • Open source, easily upgradeable firmware

This makes it easy to use a Raspberry Pi Pico on non-Raspberry Pi platforms such as Windows, Mac, and “normal” Linux computers, where you don’t have a GPIO header to connect directly to the Pico’s serial UART or SWD port.

 

[Specifications]

The probe operates at 3.3V nominal I/O voltage.

The-probe.png


Included with the Debug Probe is a USB power cable and three debug cables:

  • 3-pin JST connector to 3-pin JST connector cable
  • 3-pin JST connector to 0.1-inch header (female)
  • 3-pin JST connector to 0.1-inch header (male)

The two 0.1-inch header cables — intended for breadboard (male) or direct connection to a board with header pins (female) — are coloured as below:

  • Orange: TX/SC (Output from Probe)
  • Black: GND
  • Yellow:RX/SD (Input to Probe or I/O)

While the cable with 3-pin JST connectors is intended to be used with the standard 3-pin connector which newer Raspberry Pi boards use for the SWD debug port and UART connectors.

The Debug Probe has five LEDs, a red LED to indicate power, and four more activity indicator LEDs

Debug-leds.png
類型: 

Accessories

品牌商: 

52Pi Store

SKU: 

ER-0046

重量: 

50 g

Raspberry Pi Debug Probe Compatible with Raspberry Pi Pico/Picow

$12.00 $0.00( / )