+31 people are viewing this product.

52Pi UPS Board With RTC & Coulometer for Raspberry Pi 4B/3B+/3B

EP-0118
52Pi Store
$21.24 $0.00( / )

優惠剩餘

[Description] UPS board supports Raspberry Pi 4B but also adds type C output. It provides enough power for the Raspberry Pi to make your Raspberry Pi still work while moving, and its design is so smart that you can get rid of troubled of a mass wire. This UPS can...
  • UPS
  • UPS PLUS
加入願望單

Guarantee safe & secure checkout

PayPal

[Description]

UPS board supports Raspberry Pi 4B but also adds type C output. It provides enough power for the Raspberry Pi to make your Raspberry Pi still work while moving, and its design is so smart that you can get rid of troubled of a mass wire. This UPS can provide you with the operation of replacing the battery yourself. This new UPS not only supports an independent RTC module, but also provides a coulomb counter.
You can obtain battery voltage and current information through I2C in the system. Combined with different programming methods, you can inherit the power information into the system. It is also convenient to detect the state of the battery, which can be detected and warned through the program. It can use most of the 18650 standard batteries and fully comply with the battery characteristics in terms of battery life. In addition, the power display provided on the circuit board is also very user-friendly. The illuminated LED light can quickly show the remain power and support the discharging while charging. You can directly connect to the external power supply for charging. At the same time, the Raspberry Pi will not be turned off.

Please install the battery first, then connect the UPS to the Raspberry Pi.
Connecting too many high-power peripherals will lead to insufficient power supply. Please pay attention to the power demand of peripherals.

Warning!!!
Please do not reverse the battery!

This product belongs to the power supply device.

Please keep it out of the reach of children. Please strictly refer to the instructions for the UPS product. If the battery polarity is reversed, it will directly burn the power management chip of the device and even cause fire or personal injury. Do not add any Components by yourself, all accidental damage caused by the cause is at your own risk.


Make sure your power adapter capacity can cover lithium battery charging and raspberry pi use case, typically is 5V 3A or better should be used.

(ex:Battery charge may require up to 2.1A, Raspberry Pi typically requires 0.6-0.8A, but up to 2.4A, at which if the power supply current is less than 4.5A, it may not be able to continue use.)


ESD Warning!!!

When connecting the battery, please do not touch the area where the yellow frame is located. ESD may cause damage to your device, so please avoid it.

 

[Battery specifications]

In order to prevent damage to the UPS equipment, please pay attention when purchasing the battery: The discharge rate of each battery cannot exceed 2C, the battery voltage is 4.2V when fully charged, the parameters of the two batteries must be the same, and the batteries cannot be mixed.

 

[How to Connect Small Power manager Board]

[Features]

New Features

  • RTC Independent Clock
  • Current and Voltage Reading
  • Battery Indicator
  • Programmable reading output voltage in OS(Not Batteries voltage)
  • Charging Status LED indicator

Old Features

  • LED remaining battery prompt
  • Replaceable battery solution
  • Support Raspberry Pi 4B/3B+/3B
  • Charging up to 2.1A
  • Rated discharge power is 15W
  • Extended Two USBA port power output
  • Extended type C port power output
  • Output overcurrent protection
  • Tap to boot, long press to shut down
  • Support the charge and discharge power display
  • The battery holder can be quickly replaced
  • Synchronous switch charge and discharge
  • Built-in power path management, support side-loading
  • Support load high current line compensation function
  • Adaptive charge current regulation to match all adapters
  • Support LED power display
  • Button boot: UPS will start when the button is pressed, Long Press to force turn off
  • Low power consumption
  • Multiple protection, high reliability
  • Output overcurrent, overvoltage, short circuit protection
  • Input overvoltage, overcharge, overdischarge, overcurrent discharge protection
  • Machine over temperature protection

UPS Plus Features

  • Easy to install
  • Enhanced power management
  • Remote OTA firmware upgrade
  • Programmable BACK-TO-AC auto power up
  • Programmable sample period
  • I2C communication
  • Standalone RTC
  • Support stacked battery design

 

[52Pi WiKi]

EP-0118

EP-0136


[Package Includes]

Bundle 1

  • 1* UPS(With RTC & Coulometer)for Raspberry Pi 4B/3B+/3B
  • 4* M2.5* copper stick
  • 4* M2.5 screws
  • 4* M2.5* long copper stick
  • 4* M2.5 nuts
  • 1* Acrylic shield
  • 1* Instructions

Bundle 2

  • 1* UPS Plus(With Remote OTA firmware upgrade &RTC & Coulometer) for Raspberry Pi4B/3B+/3B
  • 4* M2.5 copper stick
  • 4* M2.5 screws
  • 4* M2.5 long copper stick
  • 4* M2.5 nuts
  • 1* Acrylic shield
  • 1* Instructions

 

[Gallery]

 

 

18650 Battery / Raspberry Pi Board are NOT included!

類型: 

Accessories

品牌商: 

52Pi Store

Size: 

UPS, UPS PLUS

SKU: 

EP-0118

重量: 

0.11 kg

52Pi UPS Board With RTC & Coulometer for Raspberry Pi 4B/3B+/3B

$21.24 $0.00( / )