IoT Node(A) One of Docker Pi Series Module Contain GSM GPS Lora Onboard 5V+3V Dual Power Supply Radio Device for Raspberry Pi

[Description]

IoT Node(A) is one of Docker Pi series module.
IOT Node(A) = GPS/BDS + GSM + Lora.
I2C directly controls Lora, sends and receives data, controls the GSM/GPS/BDS module through SC16IS752, the mainboard only needs I2C support.
Support Raspberry Pi and other similar products.

[Specification]

GPRS section

• 1. Low power consumption, standby sleep current <1mA

• 2. Support GSM/GPRS four frequency bands, including 850, 900, 1800, 1900MHZ;

• 3. GPRS Class 10;

• 4. Support GPRS data service, maximum data rate, download 85.6Kbps, upload 42.8Kbps;

• 5. Support standard GSM07.07, 07.05 AT commands, and access the serial port through I2C interface conversion.

• 6. AT commands support standard AT and TCP/IP command ports

GPS section

• 1. Support BDS/GPS joint positioning

• 2. Support A-GPS, A-BDS

• 3. Support standard SIM card

LORA section

• 1. City working conditions: transmission distance of 500 meters (RF parameters: 0x50)

• 2. Support FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation methods

• 3. Ultra-high receiver sensitivity as low as -141 dBm

• 4. Support preamble detection

• 5. Packet engine with CRC, up to 256 bytes

• 6. LORA transceiver indicator

[Features]

• DockerPi Series
• Programmable
• Control directly(without programming)
• Extend the GPIO Pins
• GPS/BDS Support
• GSM Support
• Lora Support
• Can Stack with other Stack board
• Independent of the mainboard hardware (require I2C support)

[Package Includes]

• 1 x IoT Node(A) Board
• 1 x Instructions
• 4 x M2.5*12 + 6 Copper stick
• 4 x M2.5*6 Nut
• 4 x M2.5*6 Half-round head screw
• 1 x 433MHz L-Shaped Tape Antenna
• 1 x 2.4GHz PCB Antenna
• 1 x GPS/BDS High Gain GPS Built-in Ceramic Active Antenna

[52Pi WiKi]

EP-0105 - 52Pi Wiki